Performancing Metrics

| | | lee@srdtuning.com | 01444 616 771

HKS Hypermax S Yaris GR

HKS Hypermax S Yaris GR

£2,196.00

Available on backorder

SKU: 80300-AT025 Categories: , , , Tags: , , , ,

Description

S

Code No. 80300-AT025

 

Going beyond just ride comfort or handling performance, a new standard of “Driving Comfort” aims for comfort in ride but also in the peace of mind generated by handling performance and drivability . An uncompromising balance which delivers on all the demands of street driving.

 

 


The model in the photo is GXPA16.

 

 

 

Application

Engine G16E-GTS
Model Year 20/09 –
Remarks

Specification

FRONT REAR
Damping force adjustment 30 steps 30 steps
Base valve
Height adjustable lower bracket
Upper mount Stock Rubber
Inverted/Normal type Inverted Normal
Damper/Spring layout Coilover Separated
Spring rate change at factory Possible Possible
Damping force adjustment with wire
Helper spring
(Spring rate N/mm)
Ride Heightmm
Factory *2 Test data Adjustable range
High – Low *3
Drivable range
High – Low *4
FRONT Ride height *1 654 679 ~ 634 679 ~ 634
Against stock -25 0 ~ -45 0 ~ -45
REAR Ride height *1 651 677 ~ 630 677 ~ 630
Against stock -26 0 ~ -47 0 ~ -47

 

*1. Height from road surface to fender arch.
*2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS’ recommended setting.)
*3. Adjustable range (However, the lowest value may not be road legal.
Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive.
Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.)
*4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.)
Caution). Actual data depends on each vehicle.

Kit information

Spring of Full Kit

F R
Spring rate N/mm(kgf/mm) 69 ( 7.0 ) 59 ( 6.0 )
Free height (mm) 200 250
Spring type Straight Barrel type Straight Barrel type
Recommended range to change spring rate N/mm(kgf/mm) +10 ( 1 ) ※ +10 ( 1 ) ※

Specification of damper

F R
Damping force (Rebound/Damping)N* 603 / 490 363 / 452
Default position of dial 15 15
Remaining damper stroke (Rebound/Damping)mm 45 / 61 49 / 65

* The value of the damping force is at piston speed of 0.1m/sec.

Setting data

F R
Default Test Drivable limit
High *
Drivable limit
Low *
Default Test Drivable limit
High *
Drivable limit
Low *
Length of
case (mm)
301 326 281 273 290 255
Spring
Set length(mm)
203 203 203
Length to ride hight
adjuster (mm)
20 45 0 40 58 25
Lever ratio 1.02 1.42(spg) , 1.32(dmp)

* Refer to the above explanation *3 of ride height information for drivable high and low limitations.

Test vehicle information

F R
Vehicle weight kg 773 515
Tire size (Air pressure) kPa 225 / 40 – 18 ( 220 ) 225 / 40 – 18 ( 200 )
Wheel size 8.0 JJ × 18 inset 45 8.0 JJ × 18 inset 45
Alignment
(Toe/Camber)
Test data in 0 mm / -3°00′ out 2 mm / -2°11′
Standard value in 1.8 ± 2.0 mm / -1°23′ ± 0°45′ in 2.2 ± 2.0 mm / -1°55′ ± 0°45′

* Test data at HKS.

 

Parts List  * It may be changed without prior notice.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

LATEST PROJECT

ADDRESS

Website: www.srdtuning.com
Email: lee@srdtuning.com

PAYMENT METHODS

Payment Types